Home
Posts filed under Service mode
0 Dilihat
The error code E808 is not listed in the imageRUNNER 5570 / 6570 Service Manual. The error code description should read:
E808-0001 The IH power supply input voltages are higher than the stipulated voltages.
E808-0002 The IH power supply input voltages are lower than the stipulated voltages.
The
remedy description for either code is to plug the machine into a wall
outlet with the correct voltage and replace the fixing heater power
supply.
Try this
If i were you i would check the primary corona..
Or Potential control system.
Anoter easy thing could be the drum screw isnt tight.
Or the MSW2..
Disable potential control by going into service mode Copier>Option>Tempo>F-POT-SW. Now copies can be run.
1) A solid black copy means laser is defective.
2) A white copy means you should check the Primary corona and HVT pcb.
3) A good copy means you should check the Potential sensor PCB.
If it not is one of these things you are call technician.
 |
| E520 |
Product applies : imageRUNNER 2270 imageRUNNER 2870 imageRUNNER 3570 imageRUNNER 4570 imageRUNNER 2230 imageRUNNER 2830 imageRUNNER 3530
Title : E520 sub code 8001
Error :The pick up roller will move towards the rear and start to vibrate, then the E520 is generated with the sub code 8001.
Workaround :
Replacing the offset motor resolved the E520 - 8001.
M4 Offset Motor
Part number 4K1-4053-000
